Participants: Andrew, Paul, Nate, David, Jamey, Greg, Tim. New folks: Marcus, Pradeep
Ground Software: David, Greg and Jamey talked ground software.
CAN Nodes: Paul and Nate's CAN node development systems are FINALLY up and running and three weeks of tool and Windows hell... their job is to blink their blinky lights in the mainline and in the ISR by Sunday so we can get to work on applications. The final setup:
- "MISC" CAN node with a PIC18F458 running at 20MHz and a few LEDs
- MPLAB ICD2 w/ a custom cable to the CAN node
- MPLAB 5.62
- MCC18 (PIC C compiler) version 2.00
- LV2CORE firmware framework (see CanNodeFirmware)
- MCP2510 development board w/ Kvaser's CAN King software v4.0.1